VBA20001-R.3720.A
- A ・ -
logo�Q0310�forGraphic
070509�Gdesign�ito
・
*
Do NOT get it down forcedly because the FPCs are connected.
・
Cleaning is possible with a blower in the red circled area.
・
retainer plate (#830).
《
》
《
》
・
section. Perform cleaning.
SI-FPC
after assembly.
#830
Penta prism and SI dust cleaning in LCD
・
Take out two screws (#1504), and remove the mirror receiving part.
・
retaining plate (#830), and lower [#830].
#1504×2