VBA20001-R.3720.A
- A ・ -
logo�Q0310�forGraphic
070509�Gdesign�ito
< File >
D300 Application
NkdPTP.dll
NkdPTPDi.dll
PTPControl
Windows 2000
D300IA.ini File for storing setting conditions of adjustment software
D300 Inspection and Adjustment Software (J18433)
This inspection and adjustment software runs on Windows.
Install the software by following the below procedure.
<Operating environment>
Check the following operating environment which is required for installing this program on PC.
PC IBM PC/AT compatible
OS Windows XP Professional Edition, Windows XP Home Edition,
Windows Vista, Windows2000,
CPU Pentium II 300MHz
RAM (memory) 256 MB or more
HD 6MB-or-more free disk space is required when installing
Monitor resolution 1024 × 768
Interface
※ USB interface (V1.1, 2.0)
RS232C(com1 ~ com9)
As long as the above hardware requirements are met, any PC such as desktop or laptop, etc is available.
< Cautions in starting program >
When starting this program, close all the other applications.
If some other applications are running, this program may not be activated.