89
Specifications and Safety Standards
6
Chap. 6
Specifications and Safety Standards
1
Microscopy (Principles)
Use objectives and eyepieces of the microscope to magnify minute cells and tissue optically, and manipulate levers and
knobs of the microscope unit to adjust the focus or move the observation point. Then observe or take photographs of the
sample fixed on the slide.
■ Intended use of the product (for medical care)
This microscope is intended for use in microscopic experiment and diagnostics of cells and tissues at hospitals or by
doctors in private practice in the field of pathology, anatomy, and cytology.
The microscopy with diascopic/episcopic illuminations is used to observe a sample fixed on the slide (cells and
tissue) as the specimen.
The product is classified as an in-vitro diagnostic medical device.
IVD
This product is not intended for use for measurement.
The scale on the focus knob and stage is an indicator to reproduce the position and does not guarantee the value of
the thickness or length of a sample measured using this scale.
■ Intended user
It is intended for the medical professional and those who work on experimentations in the field of pathology and
cytology.
2
Performance Properties
■ ECLIPSE Ci-E Nikon Microscope
Model ECLIPSE Ci-E
Optical system Infinity-corrected CF optical system
Objective CFI60
Eyepiece: Field number 22 (with ergonomic tube/binocular tube),
25 (with trinocular tube T/F)
Nosepiece: Motorized sextuple
Focus up/down motion Drive system: Manual coarse/fine motion (calibration markings for fine motion:
1 m/marking)
Stroke: 2 mm upward, 28 mm downward
With refocusing mechanism
Light source for
dia-illumination
White LED
Control power 12 V 75 W integrated (100 to 240 V)
Input ratings 100-240 VAC±10%, 50/60 Hz, 1.0 A
Power consumption
(nominal)
13 W
To Next Page
Loading...
Need help?
General
