Chapter 6 Safety Principle
66
1
Safety Principle
1.1 Test Principle (Bright-field Observation)
Light from the light source goes through the condenser, and illuminates the sample.
The transmitted light from the sample enters the objective, and the enlarged image can be observed through the eyepieces.
Aperture diaphragm lever equipped for the condenser adjusts the illumination brightness.
Observation magnification can be changed by switching the objective.
1.2 Intended Purpose
This microscope and accessories are optical instruments used to enlarge images of specimens, preparations, and cultures
for medical purposes.
1.3 Intended User
Medical professionals and those who work on experimentations in the field of pathology and cytology.
1.4 Applicable Standards
• CE Marking
• IVD Regulation
• RoHS Directive
• C-UL-US Listed
• FCC Part 15 Subpart B Class A
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
• CAN ICES-003(A) / NMB-003(A)
• Australian EMI (AS/NZS CISPR11)