Chapter 7 Specific Operations
70
2
Adjusting the Brightness
The illumination brightness can be adjusted for the following devices. Turn the brightness control dial to adjust the brightness
to a comfortable level.
Depending on the system configuration, some devices support remote control of the brightness.
For details, see the sections in Chapter 8 describing how to use the individual devices.
Adjust the brightness using the LED brightness control dial of
the device
• P2-DBL LED Diascopic Illumination Base
• P-DSL32 LED Diascopic Illumination Stand
Adjust the brightness using the C-FLED2 LED Light source fo
fiber illuminator
(Refer to the instruction manual supplied with the C-FLED2 fo
details.)
• P2-CIA Coaxial Epi Illuminator
• C-FDF Flexible Double Arm Fiber Illumination Unit
• C-FID2 Double Arm Fiber Illuminator
• P2-FIR Ring Fiber Illumination Unit
• P2-DBF Fiber Diascopic Illumination Base
• P-DSF32 Fiber Diascopic Illumination Stand
Adjust the brightness using the C-HGFI/C-HGFIE HG
Precentered Fiber Illuminator
(Refer to the instruction manual supplied with the
C-HGFI/C-HGFIE for details.)
• P2-EFLI Epi Fluorescence Attachment
• P2-EFLM Motorized Epi Fluorescence Attachment
Adjust the brightness using the power supply section of each
unit
(Refer to the instruction manual supplied with the relevant
product for details.)
• P2-FIRL2 LED Ring Illumination Unit 2
• P-DF2 LED Dark Field Unit 2
• C-LSL2 LED Epi Illuminator 2
Brightness control on the P2-DBL LED Diascopic
Illumination Base
To Next Page
Loading...
Need help?
General
