You can bar the calls that can be made or received with
the device (network service)
. To change the settings,
you need the barring password from your service
provider. Call barring affects all call types.
Call barring and call divertin
g cannot be active at the
same time.
When calls are barre
d, calls may be possible to certain
official emergency numbers.
To bar calls, select from the following:
● Outgoing calls
— Prevent making voice calls with
your device.
● Incoming calls
— Prevent incoming calls.
●
International calls
— Prevent calling to foreign
countries or regions.
● Incoming calls when roaming
— Prevent
incoming calls when outside your home country.
● International calls except to home country
— Prevent calls to foreign countries or regions, but
allow calls to your home country.
To check the status of voice call barrings, select the
barring option and
Options >
Check status
.
To deactivate all voice ca
ll barrings, select a barring
option and
Options
> Deactivate all barrings
.
To change the password used
for barring voice and fax
calls, select
Voice call barring
> Options
> Edit
barring password
. Enter the current code, then the
new code twice. The barring password must be four
digits long. For details, contact your service provider.
Network settings
Select
> Settings
> Settings
and Phone
>
Network
.
To select the network mode, select Network mode
and Dual mode
, UMTS
, or GSM. In dual mode, the
device switches automatically between networks.
Tip: Selecting
UMTS
enables faster data transfer,
but may increase the de
mand on battery power
and reduce the battery life. In regions close to
both GSM and UMTS networks, selecting
Dual
mode
may cause constant
jumping between the
two networks, which also
increases the demand
on battery power.
To select the operator, select
Operator selection
and
Manual
to select from available networks, or
Automatic
to set the device to select the network
automatically.
To set the device to indica
te when it is used in a
microcellular network (MCN), select
Cell info
display
> On
.
Video sharing
Video sharing requirements
Video sharing requires a UMTS connection. For more
information on the service, UMTS network availability,
and fees associated with using this service, contact
your service provider.
To use video sharing you must do the following:
23
Call functions
Cyan
To Next Page
Loading...
Need help?
General
