Messaging
Select
> Messaging.
In Messaging (network se
rvice), you can send and
receive text, multimedia, audio, and e-mail messages.
You can also receive web service messages, cell
broadcast messages, and special messages contai
ning
data, and send service commands.
The available messaging types may vary. For more
information, contact your service provider.
Before sending or receiv
ing messages, you may need
to do the following:
● Insert a valid SIM card in
the device and be located
in the service area
of a cellular network.
●
Verify that the network supports the messaging
features you want to use and that they are activated
on your SIM card.
● Define the internet access
point settings on the
device.
● Define the e-mail account settings on the device.
● Define the text message settings on the device.
● Define the multimedia me
ssage settings on the
device.
The device may recognise th
e SIM card provider and
automatically configure some of the message settings.
If not, you may need to define the settings manually;
or contact your service provider to configure the
settings.
The appearance of a picture message may vary
depending on the receiving device.
Only devices that have comp
atible features can receive
and display multimedia me
ssages. The appearance of
a message may vary dependin
g on the receiving device.
Write and send messages
Select
> Messaging
.
Important:
Exercise caution when opening
messages. Messages may contain malicious software
or otherwise be harmful to your device or PC.
Before you can create a multimedia message or write
an e-mail, you must have
the correct connection
settings in place.
The wireless network may limit the size of MMS
messages. If the inserted picture exceeds this limit the
device may make it smaller
so that it can be sent by
MMS.
Check the size limit of e-mail messages with your
service provider. If you attempt to send an e-mail
message that exceeds the size limit of the e-mail
server, the message is left in
the Outbox folder, and the
device attempts to resend it
periodically. Sending an e-
mail requires a data co
nnection, and continuous
attempts to resend the e-mail may increase your data
transfer costs. In the Outbox
folder, you can delete such
a message, or move it to the Drafts folder.
34
Messaging
Cyan
To Next Page
Loading...
Need help?
General
