compatible with this devi
ce. Incompatible cards may
damage the card and the device and corrupt data
stored on the card.
Charge the battery
Your battery has been partially charged at the factory.
If the device indicates a low charge, do the followin
g:
1. Connect the charger to a wall outlet.
2. Connect the charger to the device.
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet
.
You do not need to charge the battery for a specific
length of time, and you can use the device while it
is
charging. If the battery is
completely discharged, it
may take several minutes before the charging indicator
appears on the display or before any calls can be made.
Tip: If you have old compatible Nokia chargers,
you can use them with your device by attaching
the CA-44 charger adapter to the old charger. The
adapter is available as a separate accessory.
USB charging
You can use USB charging when a wall outlet is not
available. When charging your device with the USB dat
a
cable, the charging time is longer. USB charging
efficiency varies significantly. In some cases, it may
take a very long time for charging to start and the
device to start functioning.
With USB charging, you can also transfer data with
the
USB data cable while charging the device.
1. Connect a compatible USB device to your device
using a compatible USB data cable.
Depending on the type of th
e device that is used for
charging, it may take a while for charging to start.
2. If the device is switch
ed on, select from the
available USB mode option
s on the display of the
device.
Switch the device on and off
Press and hold the power
key to switch the device
on and off. Press the
power key briefly to end a
call or close an
application.
If the device asks for a PIN
code, enter the PIN code,
and select
OK.
If the device asks for the
lock code, enter the lock
code, and select
OK. The
factory setting for the
lock code is 12345.
8
Get started
Cyan
To Next Page
Loading...
Need help?
General
