Settings
Application settings
Select
> Settings
> Settings
and Applications
.
Select an application from the list to adjust its setti
ngs.
Device and SIM card security
Select
> Settings
> Settings
> General >
Security
.
To change the PIN code, select
Phone and SIM card
>
PIN code
. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised
use and is provided with
the SIM card. After three
consecutive incorrect PIN co
de entries, the code is
blocked, and you need to use the PUK code to unblock
it before you can us
e the SIM card again.
To set the keypad to lock automatically after a defined
period, select
Phone and SIM card
>
Keypad
autolock period
.
To set a time-out period after which the device is
automatically locked and can be used only if the correct
lock code is entered, select Phone and SIM card
>
Phone autolock period
. Enter the length of the time-
out period in minu
tes, or select
None to deactiveate
the autolock feature. When the device is locked, you
can still answer incoming
calls, and calls may still be
possible to the official emergency number
programmed into your device.
To change the lock code, select
Phone and SIM card
>
Lock code
. The default lock code is 12345. Enter the
current code and then the new code twice. The new
code must be 4-255 char
acters long. Alphanumeric
(uppercase and lowercase) characters can be used. Th
e
device notifies you if the lock code is not properly
formatted.
Common accessory settings
Select
> Settings
> Settings
and General >
Enhancement
.
With most accessories, you can do the following:
To define which profile is activated when you attach an
accessory to your device, select the accessory and
Default profile
.
To set the device to answer
phone calls automatically
after 5 seconds when an a
ccessory is attached, select
Automatic answer
> On. If the ringing type is set to
Beep once or
Silent
in the selected profile, automatic
answering is disabled.
To illuminate the device while it is attached to an
accessory, select
Lights
> On.
Restore original settings
To restore the original
device settings, select
>
Settings
> Settings
and General
> Factory
settings. To do this, you need your device lock code.
After resetting, the device may take a longer time
to
switch on.
56
Settings
Cyan
To Next Page
Loading...
Need help?
General
