62 /Administration
6. Permissions
How It Works
Permissions are a series of seven features that you can control for
each telephone in your system. The features are listed and briefly
described in the table below.
Permission Default Other
Setting Settings
Full Handsfree:
Allows a person to make or receive
calls without having to pick up the receiver.This feature No Yes
also allows a headset to be used with the telephone.
Handsfree Answerback:
Allows a person to answer
a voice call without lifting the receiver on their telephone. Yes No
Pickup group:
Telephones in the same pickup group
can be used to answer any calls ringing on another
telephone in the group, even if the telephones do not No l/2/3/4/5/
normally use the same outside lines. 6/7/8/9
Page Zone: You
can assign each telephone in your
system to one of six Page Zones, or prevent any
1
2/3/4/5/6/Nc
telephones from receive page messages
Auxiliary Ringer:
You can allow all incoming calls that
ring on a particular telephone to also drive the Auxiliary
Ringer.
No Yes
Call Forward No Answer:
Each telephone in your
None
telephone
system can be programmed to forward all calls which are set number
not answered. You can control both the telephone to
which the calls are forwarded and the number of times a 3 2/3l4/6/10
call will ring before it is forwarded.
Priority Call: You
can control whether or not each
telephone in your system can override active calls and
Do Not Disturb in order to place important inside calls.
No Yes
System Coordinator Guide
To Next Page
Loading...
