Norstar M7324 User Manual

91
:
4
Feature Operations
This chapter has been written for you and your co-workers to use
as a reference to how Norstar features operate.
Some Norstar features may not be available in your system
because of the settings assigned in Norstar Configuration or
Administration programming. If a feature is controlled by this
programming, there will be a note telling where in Administration or
Configuration the settings can be changed. This will help you to
know whether you can change the appropriate settings, or whether
you must contact your Installer or Service Representative.
The Norstar system has many more features than any telephone
could have buttons. You can help your co-workers determine
which features they will use frequently and help them p’rogram
these features onto memory buttons. When the Norstar system is
first installed, every telephone will function with pre-programmed
(default) features.
Remember while reading this chapter that “set” is another word for
a telephone.
Before you begin programming memory buttons, you should be
aware of what features are already programmed on your telephone.
The steps below explain how to use the Button Inquiry feature to
determine what each button is programmed to do.
To determine which features are already programmed:
1. Press (ml
2. Press any button. The button’s function will appear on
the display.
.:
I
.i
.: . .
To determine the set number (Intercom number) of a
telephone:
1. Press Imm
2. Press Ilntercoml
The Intercom number, set Name, and port number (for
the Installer’s use only) appear on the display.
system Coordinator Guide

Norstar M7324 Specifications

General

Brand	Norstar
Model	M7324
Category	Telephone
Language	English

Summary

2 Norstar Orientation

Default Button Functions

M7324 Default Buttons (Square Template)

Dual Memory Buttons Without Indicators

Memory Buttons With Indicators

Configuration settings

Details various system configuration settings for lines and call handling.

A. System Configuration

Details various system configuration settings for lines and call handling.

5. Change DNs

B. General Administration

3 Norstar Administration

Entering Administration

Provides detailed steps to enter Norstar Administration.

Norstar Administration Headings and Sub-Headings

1. System Speed Dial

Explains the system speed dial feature and its procedures.

System Speed Dial Procedures

Guides on managing system speed dial entries for up to 70 numbers.

2. Names

How It Works

Names Procedures

Time and Date Procedures

4. Restrictions

Explains how restrictions prohibit specific calls and related procedures.

Restriction Table

Lists default restrictions, their digit sequences, and purposes.

Restrictions Procedures

Guides on entering administration and accessing restriction settings.

5. Overrides

Explains how overrides bypass programmed restrictions and related procedures.

Override Table

Lists default overrides, their digit sequences, and purposes.

Overrides Procedures

Guides on applying, removing, or copying overrides.

6. Permissions

Describes seven features controlled for each telephone and related considerations.

Permissions Table

Lists permissions, default settings, and other settings for telephone features.

7. Night Service

Explains how night service provides efficient after-hours system operation.

8. Passwords

Explains the two types of passwords for system security and related procedures.

How It Works

Explains the two types of passwords for system security and abuse prevention.

Passwords Procedures

Guides on changing and recording system passwords for security.

To change the Administration password

Provides steps to change the administration password for system access.

To change a Restriction password