AFP-3030 Operations Manual — P/N DOC-01-039:A 26/11/2015 56
Section 5: Printing Reports
A variety of reports can be generated and printed from the AFP-3030. Reports listing all event,
alarm, fault, or supervisory history can be generated from the history screens in Section 4, “View-
ing and Printing History Information”, on page 52. The following section describes how to print
programming, Walk Test, and active point information.
5.1 Printer Functions Screen
The following screen displays when the Printer Functions soft key is pressed at the Main
Menu. This key will appear only if a printer has been selected through programming.
Figure 5.1 Printer Functions Screen
Soft Keys
PROGRAMMING: Press this soft key to display the Print Programming Menu screen.
ACTIVE POINTS: Press this soft key to display the Active Points Menu screen.
NOTE: Report formats are shown below as printed by an 80-column printer. When these reports
are printed on a Keltron, which is a 40-column printer, the formats are the same except they are
displayed on two lines instead of one.
LAKEVIEW GENERAL HOSPITAL
SYSTEM NORMAL
10:22:34A TUE JAN 25, 2011
PRINTER FUNCTIONS
PROGRAMMING
ACTIVE POINTS INSTALLED POINTS
DETECTOR MAINTENANCE REPORT BACK
To Next Page
Loading...
Need help?
General
