3 AFP-3030 Operations Manual — P/N DOC-01-039:A 26/11/2015
General Information Operating Features
1.4.1 The Display/Keypad
The display/keypad provides an easy-to-use keypad and large LCD (liquid crystal display) that
simplifies the programming process.
Figure 1.1 The Display/Keypad
The Liquid Crystal Display
The display is 40 characters wide by 16 lines. It displays all programming screens, as well as
events, history, device and other information.
Fields may be entered or changed and commands may be issued on the display using the keypad.
The Keypad
The keypad has several types of keys, described below.
The keypad consists of several types of keys: alphanumerics, control keys, soft keys, and fixed
function keys.
Keypad
The alphanumeric portion of the keypad is in standard QWERTY format. This keypad is functional
mainly when an entry is requested by the system. Otherwise, pressing these keys results in no entry.
Soft Keys
The ten keys to the left and right of the display function to select commands that appear on the
display. Each screen has different information, and each key changes function to suit the screen.
Beneath each screen in this manual is a description of the function of each soft key.
Fixed Function Keys
The nine keys aligned along the upper right edge of the keypad/display are fixed function keys.
FAULT
SCROLL
SUPERVISORY SCROLL
DISABLE SCROLL
OTHER SCROLL
ALARM DEVICES TEST - Press
this key to place all devices designated as Alarm Devices into test mode. When alarm devices are
placed in test, the fire panel will display, “Starting Alarm Devices Test”, the LED next to the Alarm
QWERTY Keyboard
keypad-NZ-079.wmf
Special Function
Keys
Control Keys
Fixed Function Keys and
Event Status LEDs
Soft Keys
Panel Status LEDs
Event Keys: Scroll through a list of events of
these types, each of which will appear on the
display once the associated button is pushed.
The OTHER EVENT
SCROLL key also scrolls
through CO Alarm and Prealarm events.
To Next Page
Loading...
Need help?
General
