Using DGX-2 System in KVM Mode
DGX-2 System User Guide
101
C.6. Australia and New Zealand
Australian Communications and Media Authority
This product meets the applicable EMC requirements for Class A, I.T.E equipment
Power supply Exempt
0 0 0
0 0
System memory Exempt 0
0 0
0
0
Hard drive Exempt
0 0 0
0 0
Mechanical parts (fan, heat sink, bezel…)
Exempt 0
0 0 0
0
Cables/Connectors
Exempt
0
0 0
0 0
Soldering material
0 0 0 0 0 0
Flux, Solder Paste, label and other
consumable materials
A Japanese regulatory requirement, defined by specification JIS C 0950: 2008, mandates that manufacturers provide Material Content
Declarations for certain categories of electronic products offered for sale after July 1, 2006.
Product Model Number: DGX-2
Symbols of Specified Chemical Substance
Notes:
1. “0” indicates that the level of the specified chemical substance is less than the threshold level specified in the standard, JIS C 0950: 2008.
2. “Exempt” indicates that the specified chemical substance is exempt from marking and it is not required to display the marking for that
specified chemical substance per the standard, JIS C 0950: 2008.
3. “Exceeding 0.1wt%” or “Exceeding 0.01wt%” is entered in the table if the level of the specified chemical substance exceeds the threshold
level specified in the standard, JIS C 0950: 2008.