Oki C711 User Manual

44205401TH Rev.1
118 /
Oki Data CONFIDENTIAL
5. Maintenance Menu
5.6 Printer boot menu list
While pressing the SET button, turn on the power to display the Boot Menu.
Memo
To display the Boot Menu, entry of password is required. Default value of password
is "aaaaaa".
Category Item Setting value Function
Enter
Password
************ Enter password to enter Boot Menu.
Enter the password of 6 to 12 digits of alphanumeric.
The initial value is "aaaaaa".
Parallel
Setup
Parallel Enable Setting Valid/Invalid of parallel interface.
Disable
Bi-Direction Enable Setting Valid/Invalid of bi-direction of parallel
interface.
Disable
ECP Enable Setting Valid/Invalid of ECP mode.
Disable
Ack Width Narrow Setting the ACK width when receiving the compatible
data.
NARROW = 0.5 μs
MEDIUM = 1.0 μs
WIDE = 3.0 μs
Medium
Wide
Ack/Busy
Timing
Ack in Busy Setting order of outputting the BUSY signal and the
ACK signal when receiving the compatible data.
Ack while Busy
I-Prime 3 microseconds
50 microseconds
Setting Valid time/Invalid of the I- PRIME signal
Disable
Offline
Receive
Enable Setting Valid/Invalid of the function that enables to
keep the signal reception possible without changing
I/F signal even when an alarm is issued.
Disable
USB
Setup
USB Enable Setting Valid/Invalid of USB interface.
Disable
Speed 480Mbps Setting the maximum transfer speed of USB
interface.
Enable
Soft Reset Enable Setting Valid/Invalid of Soft Reset.
Disable
Offline
Receive
Enable Setting Valid/Invalid of the function that enables to
keep the signal reception possible without changing
I/F signal even when an alarm is issued.
Disable
Serial
Number
Enable Setting Valid/Invalid of USB serial number.
Disable
Category Item Setting value Function
Security
Setup
Job Limitation Off Limits the job to accept. The encrypted
authentication print only is accepted.
It is displayed when the optional internal SD Memory
Card is installed.
Encrypted Job
Make Secure
SD Card
Execute Enables encryption functionality for data to store
on an SD card. This option enables encryption key
generation and applies the information for such
encryption (security mode) functionality, initializing
the SD card. The option first displays the message:
Are You Sure?
Yes
No
Selecting No restores the last menu view. Selecting
Yes makes the printer reboot automatically, enabling
the encryption functionality.
[Display condition]
The printer has an SD card, its SD card encryption
functionality is disabled and Storage Setup-Enable
Initialization is set to Yes.
Make Normal
SD Card
Execute Disables encryption functionality for data to store
on an SD card. This option deletes any encryption
key and does not apply the information for such
encryption (security mode) functionality, initializing
the SD card. The option first displays the message:
Are You Sure?
Yes
No
Selecting No restores the last menu view. Selecting
Yes makes the printer reboot automatically.
[Display condition]
The printer has an SD card, its SD card encryption
functionality is enabled and Storage Setup-Enable
Initialization is set to Yes.
Reset Cipher
Key
Execute Re-generates the encryption key that is used in the
encrypted SD Memory Card.
It is displayed when the optional internal SD Memory
Card is installed, and the encrypted SD Memory
Card function is made valid.

Oki C711 Specifications

General

Brand	Oki
Model	C711
Category	Printer
Language	English