44205401TH Rev.1
58 /
Oki Data CONFIDENTIAL
3. Set up
3.7 Connecting method
<USB connection>
Note! Please refer to user’s manual for operation environment.
Prepare for USB cable
Notes! • The printer cable is not included.
Provide the USB2.0 cable for special user.
• When connecting the cable in [Hi-Speed] mode of USB 2.0, please use
the USB cable with Hi-Speed spec.
• Select the USB cable of less than 5m. It is recommended to use the
USB cable of less than 2m.
Turn the printer and computer OFF.
Memo Although USB cable can plug-and-play with computer and printer power
on, after this the setup of printer driver and USB driver may be required.
Here the printer is turned off to plug-and-play the USB cable.
Connect the computer to the printer.
(1) Insert the USB cable into the USB interface connector of printer.
(2) Insert the USB cable into the USB interface connector of computer.
Note! Do not insert the USB cable into the netw
ork interface connector.
It may cause trouble.
Memo Please refer to user’s man
ual for setup of printer driver.
To Next Page
Loading...
Need help?
General
