- 18 -
2. Setup
How to Use of the Operator Panel
This section explains the names and functions of components on the operator panel.
• How to Use the Numeric Keypad
• How to Use the Fn Key
• Function Menu List
No. Name Function
1 Display screen Displays operating instructions and the status of the printer.
2 «ON LINE» button Switches between online and offline modes.
3 «CANCEL» button Cancels the current print immediately.
4 «ENTER» button Confirms the highlighted item.
5 Scroll button or Selects the menu or scrolls the screen.
6 «BACK» button Returns to the previous screen.
7 «HELP» button Displays the help screen. To close, press the «HELP» button,
«BACK» button, or «CANCEL» button.
8 «POWER SAVE» button • Enters or exits the power saving mode.
• Exits the sleep mode.
Lights up green in the power save mode and blinks green in the
sleep mode.
9 Numeric Keypad • Enters numbers.
• Enters alphabetical characters and symbols.
A password can be entered only with a numeric keypad.
10 «Fn» key Displays the equipment setting menu screen with a shortcut
function.
11 «CLEAR» key Executes the following actions according to the entered items
when pressed or held down.
• Minimizes a setting value.
• Enters zero for a setting value.
• Deletes a character.
• Cancels the selected item.
Returns to the previous settings. Not available when entering an
IP address.
12 «READY» indicator Lights up green in online mode and turns off in offline mode.
13 «ATTENTION» indicator Lights up or blinks orange when an error occurs in the device.
14 NFC mark Bring the device closer to this mark when using the NFC
function.
For details on the NFC function, refer to "Using from a Mobile
Device (Advanced Manual)".
No. Name Function
To Next Page
Loading...
Need help?
General
