- 31 -
2. Setup
Test Printing from the Printer
Check that you can print with the printer. Check the detailed settings and status of your
printer by printing the contents of the settings (Configuration).
• If you purchased optional equipment such as the additional tray unit, check the printer after mounting the optional
equipment. For details on attaching optional equipment, see "
Options".
• When a printer is in the power saving mode, press the «POWER SAVE» button to restore from the mode.
1
Press the «Fn» key on the operator panel.
2
Enter «1», «0», «0» using the numeric keypad, check [100] is displayed on the
display screen, and press the «ENTER» button.
3
Press the «ENTER» button as [Execute] is selected.
After finishing a print of printer settings, a setup for printing from a printer completes.
• You can also print reports and lists for each function. Refer to "Checking the Current Settings (Advanced
Manual)".
• When optional equipment is mounted
After mounting an optional equipment, check the printer settings in the same
manner and check if the mounted optional equipment is properly displayed on the
printing result.
To Next Page
Loading...
Need help?
General
