3
If there is another original, insert it in the
same way.
4
After all the originals are pulled in, press
[JOB FINISH].
Memo
• If you want to stop copying, press [JOB CANCEL].
Making Copies
Basic copying procedure
Make copies following the procedure below.
1
Make sure that paper is placed in the
tray(s).
For the types and sizes of acceptable paper and how to
place it.
2
Place the original(s).
For the types and sizes of originals and how to place
them, see the following pages:
P.28 "Acceptable originals"
P.29 "Using the RADF (Reversing Automatic
Document Feeder)"
P.28 "Placing originals on the original glass"
P.29 "Book-type originals"
3
Key in the desired number of copies if you
want more than one copy.
Press the [CLEAR] button on the control panel to delete
the number keyed in.
4
Select the copy modes as required.
P.43 "BASIC COPY MODES"
2
1
534
To Next Page
Loading...
Need help?
General
