Copying on an envelope
Note
• The acceptable envelope sizes are as follows:
DL (110 mm x 220 mm), COM10 (4 1/8" x 9 1/2"), Monarch
(3 7/8" x 7 1/2"), CHO-3 (120 mm x 235 mm), YOU-4 (105
mm x 235 mm)
Notes for using envelopes
Do not use the following envelopes as they may cause paper
misfeeding or damage to the equipment.
1. Badly curled, wrinkled or folded envelopes
2. Extremely thick or thin envelopes
3. Wet or damp envelopes
4. Torn envelopes
5. Envelopes which include the contents
6. Non-standard size envelopes (ones with a special
shape)
7. Envelopes with eyelets or windows
8. Envelopes sealed with adhesive paste or tape
9. Partly-opened or perforated envelopes
10. Envelopes with special coating on the surface
11. Envelopes with glue or double-sided adhesive tape
Note
• Store envelopes at room temperature and away from heat
and moisture.
1
Place the original on the original glass.
2
Place the envelope on a flat clean surface
and press it with your hands in the
direction of the arrow to expel any air.
Press it well to prevent the flap from rolling upward.
Correct any bent corners on the envelope.
3
Place the envelope with its copy side face
up on the multi-purpose tray.
Place the envelope with its flap side at the front.
4
Align the side guides to the length of the
envelope, and push the blue set button.
5
Press [MPT] on the touch panel.
2
5 6
8
7
3
4
91110
1
ABC
1
1
2
To Next Page
Loading...
Need help?
General
