Chapter 4: Character Style Commands 37
Overscore Commands (IBM)
⻬ ML320 E/I, ML321 E/I ⻬ ML320 Turbo, ML321 Turbo ⻬ ML520, ML521
⻬ ML390 Turbo, ML391 Turbo ⻬ ML590, ML591
Function ASCII Dec Hex
Overscore Printing On ESC _ 1 27 95 1 1B 5F 01
Overscore Printing Off ESC _ 0 27 95 0 1B 5F 00
The overscore feature prints a continuous line over all characters, including the space
character, but does not overscore the space produced by a horizontal tab command. This
feature is available only in the IBM emulation.
Score Style Command (Epson)
⻬ ML390 Turbo, ML391 Turbo
Function ASCII Decimal Hexadecimal
Select Score Style ESC ( - L
n
H
n
P
n
D
1
D
2
27 40 45 L
n
H
n
P
n
D
1
D
2
1B 28 2D L
n
H
n
P
n
D
1
D
2
This command lets you set underline, strike-through and overscore styles: continuous, dashed,
single or double lines.
Parameter Pn
Parameter Pn is set to 01 hex (1 dec, SOH ASCII).
Parameters L
n
and H
n
Parameters L
n
and H
n
designate the quantity of data to be scored, according to the following
equation:
L
n
+ (H
n
x 256)
If L
n
and H
n
are less than 3, the designated data will be dumped.
To Next Page
Loading...
Need help?
General