IBM Mode 27
English
IBM Mode
The following two sections explain all the available features that can be
changed, starting in this section with the features for IBM mode
(Proprinter compatibility) and followed by the features available for Epson
FX mode in the following section.
Some of these commands are applicable to both IBM mode and Epson FX
mode and the following table lists the common commands:
Against each feature, one of the following letters indicates in which mode
the command works:
P Commands work in the Proprinter mode.
F Commands work in the Epson FX mode.
Features Command
Double width SO/DC4/ESC W
Emphasised ESC E/F
Enhanced ESC G/H
Super/subscripts ESC S/T
Underlining ESC -
Form length ESC C
FF FF
6/8 LPI ESC 2/0
Line spacing ESC A/J/3
Skip over perforation ESC O/N
HTABS HT/ESC D
VTABS ESC B/VT
CR CR
LF LF
Paper out on/off ESC 8/9
Clear buffer CAN
Uni/bidirectional printing ESC U
Unidirectional (1 line) ESC <
Backspace BS
Print suppress off DC1
Cut Sheet Feeder ESC EM I/R/1/2
Graphics ESC K/L/Y/Z
15CPI ESC g
To Next Page
Loading...
Need help?
General
