63
EN
Shooting
2
Using a fl ash (fl ash photography)
The fl ash can be set manually as required. The fl ash can be used for fl ash
photography in a variety of shooting conditions.
1
Remove the hot shoe cover from the fl ash unit and attach the fl ash to the
camera.
• Slide the fl ash unit all the way in, stopping when it contacts the back of the shoe and
is securely in place.
Hot shoe cover
Changing orientation of the fl ash
You can change the vertical and horizontal orientation of
the fl ash unit. Bounce shooting is also possible.
Cautions
• Please be aware that with bounce shooting, the
intensity of the fl ash may be insuffi cient.
Removing the fl ash unit
Press the UNLOCK switch while removing the fl ash unit.
1
2
UNLOCK switch
2
Move the fl ash ON/OFF lever to the ON position, and turn on the camera.
• When not using the fl ash, return the lever to the OFF position.
ON/OFF lever
To Next Page
Loading...
Need help?
General
