66
EN
Shooting
2
Adjusting fl ash output (fl ash intensity control)
Flash output can be adjusted if you fi nd that your subject to appears overexposed, or is
underexposed even though the exposure in the rest of the frame is just right.
1
Press the Q button and select a fl ash
intensity control item.
250250 F5.6
P
i
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
0.00.0
01:02:0301:02:03
10231023
AEL/AFL
U
Flash intensity
control
2
Select a fl ash compensation value using the front dial and press the Q
button.
Cautions
• This setting has no effect when the fl ash control mode for the external fl ash unit is set to
MANUAL.
• Changes to fl ash intensity made with the external fl ash unit are added to those made with
the camera.
Assigning functions to buttons (Button Function)
Store the button-allocated options. This option is equivalent to the cCustom Menu S.
See the table below for the functions that can be assigned. The options available vary
from button to button.
1
Press the Q button to select the
button function.
250250 F5.6
P
i
Function
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
0.00.0
01:02:0301:02:03
10231023
U
AEL/AFL
Button function
2
Select an item using the front dial and press the Q button.
Button function items
[UFunction] / [VFunction] / [YFunction] / [ZFunction] / [RFunction]*
1
/ [zFunction] /
[IFunction] / [GFunction] / [nFunction] ([Direct Function]*
2
/ [P]*
3
) / [mFunction]*
4
/
[nFunction]*
4
/ [lFunction]*
5
*1 Not available in n mode.
*2 Assign the function to each of FGHI.
*3 Choose the AF target.
*4 Choose the function assigned to the button on the separately sold battery holder (HLD-8).
*5 Choose the function assigned to the button on some lenses.
To Next Page
Loading...
Need help?
General
