To Next Page

To Previous Page

No.20S046-00

39/62

FS-C4KU7DGES-F / FS-C4KU7DGES-M42 / FS-C2KU7DGES-F / FS-C2KU7DGES-M42 / FS-C2KU7DGES-C

Product Specifications and Use’s Guide

FFC procedure

1. Selects “Off” at FFCOffsetMode and FFCGainMode.

2. Sets target brightness level for offset FFC processing at FFCOffsetTarget.

3. Shading camera

4. When selecting “Once” at FFCOffsetMode offset FFC processing starts automatically.

5. FFCOffsetMode setting is switching from “Once” to “On” when offset FFC processing is finished.

6. Un-covers camera

Please do not make saturated image.

Please using the white smooth clean object for calibration and set focus.

Please proceeding one of below gain FFC processing.

A) Gain FFC processing with target brightness pixel (FFCGainMode: Once)

A)-7. Sets target brightness level for gain FFC processing at FFCGainTarget.

The setting value should be 10 digits lower than most brighter pixel of image.

A)-8. When selecting “Once” at FFCGainMode, gain FFC processing starts automatically.

A)-9. FFCGainMode setting is switching from “Once” to “On” when gain FFC processing is

finished.

B) Gain FFC processing with referencing brightest pixel (FFCGainMode: TargetPlusOnce)

B)-7. Sets adding brightness level from brightest pixel of image.

B)-8. When selecting “TargetPlusOnce” at FFCGainMode, gain FFC processing starts

automatically.

B)-9. FFCGainMode setting is switching from “TargetPlusOnce” to “On” when gain FFC

processing is finished.

Before applying FFC After applying FFC

*Note1: It is necessary to set “Off” at TriggerMode as Free run operation when proceeding FFC

function.

*Note2: It is necessary to adjust “ExposureTime” to brightness level of image is about 180 digits at

8bits

output.

*Note3: It is necessary to read / polling settings of camera to check status of FFCOffsetMode and 、

FFCGainMode after proceeding FFC function.

*Note4: It is necessary to proceeding FFC function when changing lens, light source or camera

settings

(AnalogGain, ExposureMode or TriggerMode of LineStart trigger)

Omron FS-C2KU7DGES-C User Manual

Questions and Answers: