Omron FS-C2KU7DGES-C User Manual

No.20S046-00
45/62
FS-C4KU7DGES-F / FS-C4KU7DGES-M42 / FS-C2KU7DGES-F / FS-C2KU7DGES-M42 / FS-C2KU7DGES-C
Product Specifications and Use’s Guide
10.16 Chunk Control
This function is attached additional image information to image data.
For example, the exposure time and gain information do not include in image data itself. However, Chunk data
transfers these parameters when image was acquiring.
GenICam Parameters
ChunkModeActive IBoolean Type Chunk control ON / OFF selection
Selection: “False” (Off), “True” (On)
Default: “False” (Off)
ChunkSelector IEnumeration
Type
Transfer Chunk data selection
Selection: Image, “CounterValue, Gain, ExposureTime, LineStatusAll,
TimerValue, DeviceTemperature
ChunkEnable IBoolean Type Enable Chunk data that was selected at “Chunk Selector”
Selection: “True” (Enable Chunk data) and “False” (Disable Chunk
data)
ChunkCounterSelector IEnumeration
Type
CounterValue selection
Selection: Counter0, Counter1
Default: Counter0
ChunkGainSelector IEnumeration
Type
Gain selection
Selection: AnalogAll, DigitalAll
Default: AnalogAll
ChunkTimerSelector IEnumeration
Type
Timer selection
Selecrion: Timer0, Timer1
Default: Timer0
10.17 Action Control
The multiple cameras control by one action signal.
GenICam Parameters
ActionDeviceKey IInteger Type Control identifier of camera
ActionQueueSize IInteger Type Size of scheduled action command queue
ActionSelector IInteger Type Action command application selection
Fixed as “0”
ActionGroupKey IInteger Type Action command applies camera
* The camera executes action command when group key of action
command and group key of camera is matched.
ActionGroupMask IInteger Type Select camera to apply action command
Logical AND of Group Mask of camera and Group Mask of action
command is 1 for any bit of 32bits, camera executes action command.

Omron FS-C2KU7DGES-C Specifications

General

Brand	Omron
Model	FS-C2KU7DGES-C
Category	Digital Camera
Language	English