Omron FS-C2KU7DGES-C User Manual

No.20S046-00
40/62
FS-C4KU7DGES-F / FS-C4KU7DGES-M42 / FS-C2KU7DGES-F / FS-C2KU7DGES-M42 / FS-C2KU7DGES-C
Product Specifications and Use’s Guide
10.11 Digital IO Control
Controls input and output signal through 12pin IO signal connector.
GenICam Parameters
LineSelector IEnumeration
Type
Selects setup IO pin on 12pin IO signal connector
Selection: Line0, Line1, Line2, Line3, Line4
Default: Line0
LineInverter IBoolean Type Inverts polarity of signal through selected IO pin
Selection: False (Invert Off), True (Invert On)
Default: False
LineStatus IBoolean Type Displays status of selected IO pin (whether signal exist or not)
LineSource IEnumeration
Type
Selects output signal through selected IO pin
Selection: UserOutput3, UserOutput4, FrameTriggerWait,
FrameTrigger, LineTriggerWait, LineTrigger,
SensorReadOut, AcquisitionTriggerWait,
AcquisitionTrigger, ExposureActive, Timer0Active,
Timer1Active, SoftwareSignal0, SoftwareSignal1,
LogicBlock0, PulsePerSecond, Line0, Line1, Line2,
FrameTimeout, Action0
Default: FrameTriggerWait
LineFormat IEnumeration
Type
Selects electronic format of signal for selected IO port
Selection: TTL, RS422
Default: TTL
LineDebounceTime IFloat Type Sets debounce time for selected input IO pin (µsecond)
Range: 1 to 1,000
Default: 1
UserOutputSelector IEnumeration
Type
Selects UserOuput that applying UserOutputValue
Selection: UserOutput3, UserOutput4
Default: UserOutput3
UserOutputValue IBoolean Type Sets condition for UserOutput signal
Selection: False, True
Default: False

Omron FS-C2KU7DGES-C Specifications

General

Brand	Omron
Model	FS-C2KU7DGES-C
Category	Digital Camera
Language	English