Omron NX-EIC202 User Manual

6 Installation
6 - 4
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
 Wiring Ducts
Whenever possible, route I/O wiring through wiring ducts.
Install mounting bases so that it is easy to wire the I/O Units through ducts. It is handy to have the
ducts at the same height as the EtherNet/IP Slave Terminal.
 Wiring Duct Example
*1. The height of the DIN Track is not considered in this figure.
Duct
Duct
20 mm min
20 mm min
DIN Track
EtherNet/IP
Slave
Terminal
40 mm
30 mm
30 mm
71 mm
*1
Mounting base
Duct
EtherNet/IP
Slave
Terminal
EtherNet/IP
Slave
Terminal

Omron NX-EIC202 Specifications

General

Brand	Omron
Model	NX-EIC202
Category	Controller
Language	English