Omron NX-EIC202 User Manual

29
Related Manuals
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
Related Manuals
The following manuals are related. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series EtherNet/IP

Coupler Unit User’s
Manual
W536 NX-EIC Learning how to
use an NX-series
EtherNet/IP Cou-
pler Unit and Eth-
erNet/IP Slave
Terminals
The following items are described: the
overall system and configuration meth-
ods of an EtherNet/IP Slave Terminal
(which consists of an NX-series Ether-
Net/IP Coupler Unit and NX Units), and
information on hardware, setup, and
functions to set up, control, and monitor
NX Units.
EtherNet/IP

Units
Operation Manual
W465 CS1W-EIP21
CJ1W-EIP21
CJ2H-CPU6-EIP
CJ2M-CPU3
Learning how to
use an EtherNet/IP
Unit
Information on using an EtherNet/IP
Unit that is connected to a
CS/CJ-series CPU Unit is provided.
Information is provided on the basic
setup, tag data links, and FINS commu-
nications.
Refer to the Communications Com-
mands Reference Manual (Cat. No.
W342) for details on FINS commands
that can be sent to CS/CJ-series CPU
Units when using the FINS communica-
tions service.
Refer to the Ethernet Units Operation
Manual Construction of Applications
(Cat. No. W421) for details on con-
structing host applications that use
FINS communications.
Sysmac Studio Version
1 Operation Manual
W504 SYSMAC-
SE2
Learning about the
operating proce-
dures and func-
tions of the
Sysmac Studio.
Describes the operating procedures of
the Sysmac Studio.
NX-IO Configurator
Operation Manual
W585 CXONE-AL
D-V4
Learning about the
operating proce-
dures and func-
tions of the NX-IO
Configurator.
Describes the operating procedures of
the NX-IO Configurator.
NX-series Data Refer-
ence Manual
W525 NX- Referencing lists of
the data that is
required to config-
ure systems with
NX-series Units
Lists of the power consumptions,
weights, and other NX Unit data that is
required to configure systems with
NX-series Units are provided.
NX-series Digital I/O
Units User’s Manual
W521 NX-ID
NX-IA
NX-OC
NX-OD
Learning how to
use NX-series Dig-
ital I/O Units
The hardware, setup methods, and
functions of the NX-series Digital I/O
Units are described.
NX-series Analog I/O
Units User’s Manual
W522 NX-AD
NX-DA
NX-TS
Learning how to
use NX-series
Analog I/O Units
and Temperature
Input Units
The hardware, setup methods, and
functions of the NX-series Analog I/O
Units and Temperature Input Units are
described.

Omron NX-EIC202 Specifications

General

Brand	Omron
Model	NX-EIC202
Category	Controller
Language	English