Omron NX-EIC202 User Manual

Appendices
A - 22
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
The TCP/IP Interface object is used to set up the TCP/IP interface.
Specify the service to execute with the service code.
The class ID and instance ID are given in the following table.
The instance attribute IDs are given in the following table.
03 NX unit configu-
ration mode
NX Unit configuration
information mode
Read or
Write
UINT 0000: Clear NX Unit con-
figuration information
and change to NX Unit
self-configuration mode.
0001: Set the NX Unit
configuration informa-
tion with the current Unit
configuration.
Default: 0000
04 Clock time for
event log
Time setting for event
logs
Read or
Write
ARRAY
OF UINT
UINT[0]: Year
UINT[1]: Month
UINT[2]: Day of month
UINT[3]: Hour
UINT[4]: Minutes
UINT[5]: Seconds
*1. The size is unified to the output data size in the Assembly object.
*2. Specify the value in bytes.
*3. The size is unified to the input data size in the Assembly object.
A-1-4 TCP/IP Interface Object (Class ID: F5 Hex)
Service Codes
Service code (hex) Parameter name Description
Supported service range
Class Instance
0E Get_Attribute_Single Yes Yes
10 Set_Attribute_Single No Yes
Class IDs and Instance IDs
ID type Value (hex)
Class ID F5
Instance ID 01
Attribute IDs
Attribute ID
(hex)
Parameter
name
Description Attribute
Data
type
Value (hex)

Omron NX-EIC202 Specifications

General

Brand	Omron
Model	NX-EIC202
Category	Controller
Language	English