Omron NX-EIC202 User Manual

11 - 9
11 EtherNet/IP Coupler Unit Functions
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
11-3 Event Logs
11
11-3-2 Detailed Information on Event Logs
This section describes the event logs in detail.
Events that occur in the EtherNet/IP Slave Terminal are stored as described below.
The sources of events that occur in the EtherNet/IP Slave Terminal are listed below.
This information gives the category of the event log.
You view each of these logs separately on the Support Software.
11-3-2 Detailed Information on Event Logs
Where Events Are Stored
Unit where event occurred Where events are stored
EtherNet/IP Coupler Unit In the EtherNet/IP Coupler Unit
NX Units In the EtherNet/IP Coupler Unit or in the NX Unit
Refer to the manual for the specific Unit for the location where events are
stored.
Event Sources
Item Description
Event source EtherNet/IP Master Function Module
Source details EtherNet/IP node address, slot position, NX Unit number, and model number
Event Log Categories
Event type Event log category Description
Controller event System log This is a log of the events that are detected by each Unit.
Access log This is a log of the events that affect the Slave Terminal opera-
tion due to user actions.
Support Software
Event logs
When event occurs
EtherNet/IP Coupler Unit
and certain NX Units:
Events are stored
in the EtherNet/IP Coupler Unit.
Other NX Units:
Events are stored
in the NX Unit.
EtherNet/IP
Coupler Unit
USB Connection

Omron NX-EIC202 Specifications

General

Brand	Omron
Model	NX-EIC202
Category	Controller
Language	English