Omron NX-EIC202 User Manual

Unit Versions
28
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
The following items are displayed except the unit version.
• Slot number
• Unit model number
• Serial number
• Lot number
• Hardware version
• Software version
• Total power-ON time
The software version is displayed only for Units that contain software.
 Checking Unit Versions with Support Software Other Than the Sysmac Studio
You can use Support Software other than the Sysmac Studio to check the unit versions of the Com-
munications Coupler Unit and NX Units.
Refer to the operation manual for each type of Support Software for the methods to check unit ver-
sions.
The functions that are supported depend on the unit version of the Unit. The version of Support Soft-
ware that supports the functions that were added for an upgrade is required to use those functions.
Refer to A-10 Version Information on page A-67 for the functions that are supported by each unit ver-
sion.
Unit Versions and Support Software Versions

Omron NX-EIC202 Specifications

General

Brand	Omron
Model	NX-EIC202
Category	Controller
Language	English