Omron NX-EIC202 User Manual

3 Specifications and Application Procedures
3 - 4
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
Unit power
supply
Power supply
voltage
24 VDC (20.4 to 28.8 VDC)
NX Unit power
supply capacity
10 W max.
Refer to Installation orientation and restrictions for details.
NX Unit power
supply efficiency
70%
Isolation method
No isolation between NX Unit power supply and Unit power supply termi-
nals
Current capacity
of power supply
terminals
4 A max.
I/O power
supply
Power supply
voltage
5 to 24 VDC (4.5 to 28.8 VDC)
*2
Maximum I/O
power supply cur-
rent
10 A
Refer to Installation orientation and restrictions for details.
Current capacity
of power supply
terminals
10 A max.
NX Unit power consumption 1.60 W max.
Current consumption from I/O
power supply
10 mA max. (for 24 VDC)
Dielectric strength 510 VAC for 1 min, leakage current: 5 mA max. (between isolated circuits)
Insulation resistance 100 VDC, 20 MΩ min. (between isolated circuits)
External connection terminals
Communications Connector
For EtherNet/IP communications.
• RJ45 × 2 (shielded)
Screwless Clamping Terminal Block
For Unit power supply, I/O power supply, and grounding. Removable.
Peripheral USB Port
To connect Support Software
• Physical layer: USB 2.0-compliant, B-type connector
• Transmission distance: 5 m max.
Dimensions 46 × 100 × 71 mm (W×H×D)
Weight 150 g max.
Item Specification

Omron NX-EIC202 Specifications

General

Brand	Omron
Model	NX-EIC202
Category	Controller
Language	English