P
-
ES-1553
FIGURE
6-32.
SOLENOID
VALVE
Solenoid
Valve
The solenoid valve (see Figure
6-32)
provides a posi-
tive fuel shutoff whenever the generator set is
stopped. The solenoid must be energized before fuel
will flow to the regulator. Service is limited to replac-
ing the complete valve assembly if
it
does not operate
properly. The valve may be bench tested by connect-
ing battery positive
(B+)
to the top terminal and bat-
tery negative
(B-)
to the grounded terminal. The
plunger assembly should withdraw and open the
valve when the solenoid is energized. Replace the
solenoid valve if it does not operate properly.
6-25
Redistribution or publication of this document
by any means, is strictly prohibited.
Redistribution or publication of this document
by any means, is strictly prohibited.
To Next Page
Loading...
Need help?
General
