3. Junior User Guidebook
This chapter deals with the following topics mainly:
⚫ Introduction to the structure of the oscilloscope
⚫ Introduction to the user interface
⚫ How to implement the general inspection
⚫ How to implement the function inspection
⚫ How to make a probe compensation
⚫ How to set the probe attenuation coefficient
⚫ How to use the probe safely
⚫ How to implement an auto-calibration
⚫ Introduction to the vertical system
⚫ Introduction to the horizontal system
⚫ Introduction to the trigger system
⚫ Touchscreen Controls (Touchscreen is optional)
To Next Page
Loading...
Need help?
General
