Watching TV 06
23
En
English
Using
e
on the remote control unit
• Press e to mute the sound.
e appears on the screen.
• Press e again or i + to restore the sound.
Switching the broadcast audio channel
Depending on the broadcast, you can switch the audio channel.
• Press - to change the audio channel.
The table below shows the available audio channels by broadcast
audio type.
Note
• In each of the sound multiplex mode selected using the - button,
the display changes depending on broadcasting signals being
received.
• Once the MONO mode is selected, the sound remains mono even
if the system receives a stereo broadcast. You must switch the
mode back to or mode if you want to hear stereo sound again.
• Selecting a sound multiplex mode while the input source is INPUT
1 to 4 does not change the type of sound. In this case, sound is
determined by the video source.
Freezing images
Use the following procedure to capture and freeze one frame from a
moving image that you are watching.
Important
• Displaying a static image for a long period of time, or for shorter
periods of time everyday, may result in image retention.
• Press d.
A still image appears on the right screen while a moving image is
shown on the left screen.
• Press d again to cancel the function.
Note
• When this function is not available, a warning message appears.
Muting
mode mode MONO mode
I II MONO
1
AAA
NICAM STEREO
10:00
1
AAA
NICAM STEREO
10:00
1
AAA
MONO
10:00
2
BBB
NICAM I
10:00
2
BBB
NICAM II
10:00
2
BBB
MONO
10:00
3
CCC
NICAM MONO
10:00
3
CCC
NICAM MONO
10:00
3
CCC
MONO
10:00
4
DDD
STEREO
10:00
4
DDD
STEREO
10:00
4
DDD
MONO
10:00
5
EEE
DUAL I
10:00
5
EEE
DUAL II
10:00
5
EEE
MONO
10:00
6
FFF
MONO
10:00
6
FFF
MONO
10:00
6
FFF
MONO
10:00
NICAM BroadcastsA2 Broadcasts
Stereo
Bilingual
Monaural
Stereo
Bilingual
Monaural
Setting
MONO
7
GGG
STEREO
10:00
7
GGG
STEREO
10:00
7
GGG
MONO
10:00
Digital
Broadcasts
TV/DTV
Normal image Still image
PDP4270XD_En.book Page 23 Friday, June 16, 2006 5:32 PM
To Next Page
Loading...
Need help?
General
