Setting up 08
27
En
English
Selecting a decoder input terminal
If you have connected a decoder, select a decoder input terminal
(INPUT1).
1 Repeat steps 1 to 6 provided for “Setting up analogue TV
channels manually“.
After selecting a channel (using Programme Entry), perform the
following steps:
2 Select “Decoder“ (/).
3 Select “INPUT 1“ (/).
4 Press HOME MENU to exit the menu.
Note
• With "Off" (factory default) selected, you cannot watch any images
from the decoder.
Labeling TV channels
You can name TV channels that you have set up, using up to five
characters. This may help you easily identify the channels during
selections.
1 Press HOME MENU.
2 Select “Setup“ (/ then ENTER).
3 Select “Analogue TV Setup“ (/ then ENTER).
The password entry screen appears. Enter your 4-digit password using
buttons 0 to 9.
4 Select “Label“ (/ then ENTER).
5 Select “Programme Entry“ (/).
6 Select a programme number (/).
You can select 1 through 99.
7 Select “Label“ (/ then ENTER).
The name entry screen appears.
8 Select the first character (/// then ENTER).
• The cursor moves to the second character.
9 Repeat step 8 to enter up to five characters.
• To correct entered characters, select [] or [] on the screen,
and then press ENTER. The cursor moves to the preceding or
subsequent character.
• To delete the current character, select [Delete] on the screen, and
then press ENTER.
• To put a space for the current character, select [Space] on the
screen, and then press ENTER.
10 To complete the name entry, press / or / to select
[OK] on the screen, and then press ENTER.
11 Press HOME MENU to exit the menu.
Note
• The above procedure transfers and sets the selected channel
information to the connected recording equipment such as a VCR
or DVD/HDD recorder (DVR).
Sorting preset TV channels
Use the following procedure to change the sequence of the preset TV
programmes.
1 Press HOME MENU.
2 Select “Setup“ (/ then ENTER).
3 Select “Analogue TV Setup“ (/ then ENTER).
The password entry screen appears. Enter your 4-digit password using
buttons 0 to 9.
4 Select “Sort“ (/ then ENTER).
The sort screen appears.
5 Select a channel to be shifted (/// then ENTER).
6 Select a new location (/, / then ENTER).
Sorting is executed.
7 Press HOME MENU to exit the menu.
Note
• To change a page on the Sort screen in step 6, select / on the
screen with / to select a page, and then press ENTER.
• The above procedure transfers and sets only the shifted channel
information to recording equipment such as a VCR or DVD/HDD
recorder (DVR).
Tuner NR
Child Lock
Decoder
On
Block
INPUT1
Label
Label
Programme Entry
1
1234567890
A
Delete
Space
OK
BCDEFGH I J
KLMNOPQRST
UVWXYZ, . : ;
&' ()+-* /_
@
Sort 1/4
AAAAA01
BBBBB02
CCCCC03
DDDDD04
EEEEE05
FFFFF06
GGGGG07
HHHHH08
IIIII09
10
11
12
13
14
15
16
17
RRRRR18
19
20
21
22
23
24
25
JJJJJ
KKKKK
LLLLL
MMMMM
NNNNN
OOOOO
PPPPP
SSSSS
TTTTT
UUUUU
VVVVV
WWWWW
XXXXX
YYYYY
QQQQQ
PDP4270XD_En.book Page 27 Friday, June 16, 2006 5:32 PM
To Next Page
Loading...
Need help?
General
