Pioneer PDP-4270XD User Manual

Setting up08
26
En
11 Select “Colour System“ (/).
12 Select a colour system (/).
You can select from among "Auto", "PAL", "SECAM", and "4.43NTSC".
13 Select “Store“ (/).
14 Select “Yes“, “Yes (Listed)“, or “No“ (/).
15 Press HOME MENU to exit the menu.
• Alternatively, to set up for another channel, repeat steps 6 to 14.
Note
• The above procedure transfers and sets the selected channel
information to the connected recording equipment such as a VCR
or DVD/HDD recorder (DVR).
• Manual Adjust also allows you to make selections for "Tuner NR",
"Child Lock", and "Decoder". See Reducing video noise, Setting
Child Lock, and Selecting a decoder input terminal below.
Reducing video noise
For the individual channels, you can specify whether the plasma
television should reduce video noise depending on the levels of
broadcasting signals.
1 Repeat steps 1 to 6 provided for “Setting up analogue TV
channels manually“.
After selecting a channel (using Programme Entry), perform the
following steps:
2 Select “Tuner NR“ (/).
3 Select “On“ or “Off“ (/).
4 Press HOME MENU to exit the menu.
Note
• This function may not achieve a satisfactory result, depending on
the conditions of broadcasting signals.
• When using a decoder with a decoder terminal selected, this
function may fail to achieve a good result.
Setting Child Lock
Child Lock inhibits selected TV channels from being tuned and
watched.
1 Repeat steps 1 to 6 provided for “Setting up analogue TV
channels manually“.
After selecting a channel (using Programme Entry), perform the
following steps:
2 Select “Child Lock“ (/).
3 Select “Block“ (/).
• The selection is switched between "View" and "Block".
4 Press HOME MENU to exit the menu.
Item Description
Yes You can select the channel using P+ / P–.
Yes (Listed) Select this option to register the channel as your favourite
channel.
You can select the channel using the Favourite Channel list
and P+ / P–.
No You cannot select the channel using P+ / P–.
Search
System
Colour System
Store
42.75MHz
No
B/G
Auto
System
Colour System
Store
Tuner NR
Child Lock
B/G
Auto
View
Yes
On
Colour System
Store
Tuner NR
Child Lock
Decoder
Auto
Off
View
Yes
On
Tuner NR
Child Lock
Decoder
Off
On
Block
PDP4270XD_En.book Page 26 Friday, June 16, 2006 5:32 PM

Pioneer PDP-4270XD Specifications

General

Depth	115 mm
Width	1040 mm
Height	679 mm
Weight	32100 g
Comb filter	3D
Pixel pitch	- mm
Aspect ratio	16:9
Product color	Black
Noise reduction	Yes
RMS rated power	13 W
Display diagonal	42 \
Channels quantity	99 channels
Display brightness	1100 cd/m²
Display resolution	1024 x 768 pixels
Display technology	Plasma
Power requirements	AC 220 - 240 V, 50/60 Hz
SCART ports quantity	3
Contrast ratio (typical)	3000:1
Analog signal format system	PAL, SECAM
Power consumption (standby)	0.7 W
Power consumption (typical)	291 W