2.56
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
BATTERY ACTIVATION (ELECTRIC START
MODELS ONLY)
WARNING
ALWAYS wear safety glasses and protective gloves
when activating a battery. Clean all spills immediately.
PREREQUISITES
1. Remove the battery from the vehicle and place on a
level surface.
2. Remove the electrolyte container from the package.
ACTIVATION
1. Remove the sealing strip on top of the battery.
IMPORTANT
Do not remove the sealing strip until ready to activate
the battery.
2. Remove the top strip of caps on the electrolyte
package.
NOTICE
Retain this strip of caps for battery sealing after it has
been filled.
WARNING
DO NOT pierce or otherwise open the foil seals on the
electrolyte container or attempt to separate the
individual electrolyte containers.
3. Place the electrolyte container with the foil seals
facing down into the cell filler ports on the battery.
4. Press down evenly to break the foil seals and allow
electrolyte to flow into the battery.
NOTICE
Air bubbles will begin to rise, indicating the flow of
electrolytes.
MAINTENANCE
To Next Page
Loading...
Need help?
General
