Polaris Hawkeye User Manual

3.3
ENGINE
TOOLS
SPECIAL TOOLS
TORQUE SPECIFICATIONS
ENGINE TORQUE SPECIFICATIONS
PART NUMBER TOOL DESCRIPTION
2200634
Valve Seat
Reconditioning Kit
2870390 Piston Support Block
PA-47308 Flywheel Puller
PA-47457 Starting Clutch Holder
2871293-B
Crankshaft Slotted Nut
Socket
ENGINE TORQUE SPECIFICATIONS
Fastener
Thread
Size
ES300PFE010
Ft. Lbs. (Nm)
Camshaft Chain
Tensioner Lever
6mm 5-6.5 (7-9 Nm)
Camshaft Chain
Tensioner Body
6mm 6.5-8.0 (9-11 Nm)
Camshaft Chain
Tensioner Cap
8mm 6-7.5 (8-10 Nm)
Camshaft Sprocket
Cover
6mm 6.5-8.0 (9-11 Nm)
Camshaft Sprocket Bolt 10mm 30-34 (40-46 Nm)
Carburetor
Adaptor
8mm 12-14 (16-20 Nm)
Cylinder Head Bolts 10mm
Refer to Torque
Procedure
Cylinder & Head 6mm
Bolts
6mm 5-7 (7-9 Nm)
Crankcase 6mm 6.5-8.0 (9-11 Nm)
Crankshaft Sprocket
Slotted Nut
25mm 34 (46 Nm)
Flywheel Nut 16mm 66-81 (90-110 Nm)
Oil Drain Bolt
(Crankcase)
14mm 13-16 (18-22 Nm)
Oil Filter Pipe Fitting
(Crankcase)
20mm 9.5-12 (13-16 Nm)
Oil Pressure Blind Plug 1/4 NPT 20-24 (27-33 Nm)
Oil Pressure Relief
Valve Plug
14 mm 15-17 (20-23 Nm)
Recoil Housing 6mm 7-8 (9-11 Nm)
Rocker Adjuster Screw 5mm 3.5-5 (5-7 Nm)
Rocker Cover 6mm 5-6.5 (7-9 Nm)
Rocker Adjuster Screw
Lock Nut
5mm 3.7-5.0 (5-7 Nm)
Stator Plate to
Crankcase
6mm 7-8 (9-11 Nm)
Stator to Stator Plate
Screws
5mm 5-6.5 (7-9 Nm)
Starter Motor 6mm 5-6.5 (7-9 Nm)
Starting Clutch Cover 8mm 14-15.5 (19-21Nm)
Starting Clutch Nut 16mm
103-118
(140-160 Nm)
Spark Plug (New) 12mm 7.5-9 (10-12 Nm)
Spark Plug (Used) 12mm
Tighten 30-45
degrees after
gasket contact

Polaris Hawkeye Specifications

General

Brand	Polaris
Model	Hawkeye
Category	Offroad Vehicle
Language	English