Polaris Hawkeye User Manual

3.6
ENGINE
ENGINE SERVICE DATA
KEY - Std: Standard; OS: Oversize; ID: Inner Diameter; OD: Outer Diameter; Mag: Magneto Side;
PTO: Power Take Off
Cylinder Head / Valvetrain ES300PFE010
Camshaft Lobe Height In Std
1.2938-1.2977" (32.863 - 32.963mm)
Limit
1.2820" (32.563 mm)
Ex Std
1.2938-1.2977" (32.863 - 32.963mm)
Limit
1.2820" (32.563 mm)
Journal O.D. PTO 1.0998-1.1004" (27.935-27.950mm)
Journal O.D. MAG 1.5328-1.5334" (38.935-38.950mm)
Journal Bore I.D. PTO 1.1025-1.1033" (28.005-28.025mm)
Journal Bore I.D. MAG 1.5356-1.5364" (39.005-39.025mm)
Camshaft Journal Oil Clearance
Std
.0021-.0035" (.055 - .090mm)
Limit
.0039" (.10mm)
Camshaft Chain
Install new as a part of any crankshaft removal
Cylinder Head Surface Warpage Limit .0020” (.05 mm)
Rocker Arm/Shaft Rocker arm ID .8669-.8677" (22.02-22.04 mm)
Rocker shaft OD .8656-.8661" (21.987-22.00 mm)
Oil Clearance (Limit) .0039" (.10 mm)
Valve Clearance
In Std .006" (.15 mm)
Ex Std .006" (.15 mm)
Valve Seat Angle Contacting Width In Std
.039" (1.0 mm)
Limit
.055" (1.4 mm)
Ex Std
.059" (1.5 mm)
Limit
.070" (1.8 mm)
Valve Stem Diameter In
.2342-.2348" (5.950-5.965 mm)
Ex
.2340-.2346" (5.945-5.960 mm)
Limit .1921" (4.9 mm)
Stem Length
In
3.976" (101.0mm)
Ex
3.984" (101.2mm)
Margin
In Limit .031" (.8mm)
Ex Limit .031" (.8mm)
Valve Guide Inner Diameter In
.2362-.2367" (6.0-6.012 mm)
Ex
.2362-.2367" (6.0-6.012 mm)
Stem to Guide Oil Clearance Limit .006" (.15 mm)
Valve Spring Free Length
1.640" (41.66 mm)
1.377" (35.0 mm)
Squareness 0.075” (1.9 mm)

Polaris Hawkeye Specifications

General

Brand	Polaris
Model	Hawkeye
Category	Offroad Vehicle
Language	English