EasyManuals Logo

Polaris Outlaw 500 User Manual

Polaris Outlaw 500
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
5.6
BODY / STEERING / SUSPENSION
2. Remove the fuel tank cap to allow the cover to be removed.
Once removed reinstall the fuel tank cap.
3. Reverse the removal steps to reinstall the tank cover.
Heel Pocket
1. Remove the 2 bolts from the upper portion of the heel
pocket.
2. Remove the 3 screws (A) from the lower portion and
remove the heel pocket.
3. Reverse the removal steps to reinstall the heel pocket.
Rear Cab
1. Remove the 2 bolts from the lower portion of the rear cab
on each side as shown below.
2. Push both seat grommets (C) through the rear cab, remove
screws (D) and completely remove the rear cab.
3. Reverse the removal steps to reinstall the rear cab. It may
be necessary to lubricate the rubber grommets to aid the
reassembly.
A
C
D
RepairPro Service Manual

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Outlaw 500 and is the answer not in the manual?

Polaris Outlaw 500 Specifications

General IconGeneral
BrandPolaris
ModelOutlaw 500
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals