3 – Managing Fabrics
Zoning
59264-02 A 3-25
A
Restoring the Zoning Database from a File
Do the following to restore the zoning database from a file to a switch:
1. Open the Zoning menu and select Edit Zoning to open the Edit Zoning
window.
2. Open the File menu and select Open File. A popup window will prompt you
to select an XML zoning database file.
3. Select a file and click Open.
Reloading the Source Zoning Configuration on the Switch
Do the following to reload the original zoning database configuration to a switch:
1. Open the Zoning menu and select Edit Zoning to open the Edit Zoning
window.
2. Open the File menu and select Reload from the Source.
3. Click the OK button to load the original zoning database configuration to the
switch.
Restoring the Default Zoning Database
Restoring the default zoning clears the switch of all zoning definitions.
To restore the default zoning for a switch:
1. Open the Zoning menu and select Restore Default Zoning.
2. Click the OK button to confirm that you want to restore default zoning and
save changes to the zoning database.
CAUTION!
Restoring the zoning database from a file will replace the current
zoning database on the switch.
CAUTION!
This command will deactivate the active zone set.
To Next Page
Loading...
Need help?
General
