5 – Managing Ports
Port Information Data Window
5-2 59264-02 A
S
Information in the Port Information data window is grouped and viewed by the
Summary, Advanced, Extended Credits, and Media buttons. Click a button to
display the corresponding information in the data window on the right.
Figure 5-2 Port Information Data Window Buttons
The Port Information data window entries are listed below in Table 5-1.
Table 5-1. Port Information Data Window Entries
Entry Description
Summary Group
Port Address Port Fibre Channel address.
Administrative Port Type The administrative port type (G, GL, F, FL,
or Donor). This value is persistent; it will
be maintained during a switch reset. Dur-
ing port auto-configuration, it will be used
to determine which operational port states
are allowed.
Operational Port Type The port type that is currently active. This
will be set during port auto-configuration
based on the administrative port type.
Administrative Port State The port state (Online, Offline, Diagnos-
tics, or Down) which has been set by the
user. This state may be different from the
configured administrative state if the user
has not saved it in the switch configura-
tion. This state is used at the time it is set
to try to set the port operational state. This
value is not persistent and will be lost on a
switch reset.
To Next Page
Loading...
Need help?
General
