4 – Managing Switches
Configuring a Switch
4-16 59264-02 A
S
Switch Properties
Use the Switch Properties dialog to change the switch configuration parameters:
Domain ID and Domain ID Lock
Syslog
Symbolic Name
Switch Administrative States
Broadcast Support
In-band Management
Fabric Device Management Interface
To open the Switch Properties dialog, choose one of the following:
Open the faceplate display for the switch you be configuring. Open the
Switch menu and select Switch Properties.
Right-click a switch graphic in the faceplate display, and select Switch
Properties from the popup menu.
Figure 4-7 Switch Properties Dialog
To Next Page
Loading...
Need help?
General
