4 – Managing Switches
Configuring SNMP
59264-02 A 4-33
A
Figure 4-13 SNMP v3 User Editor Dialog
Table 4-9 describes the SNMP v3 User Editor dialog parameters. After configuring
the user, click the OK button to save the settings and close the dialog.
Table 4-9. SNMP v3 User Editor Dialog
Parameter Description
User Name Name for this SNMP v3 user.
Group Read Only permits user to view only SNMP v3 user
settings. Read Write permits user to view and change
SNMP v3 user settings.
Authentication Type None, MD5, SHA. If None, no authentication phrase
is required. MD5 and SHA require authentication
phrase.
Authentication Phrase A unique string or phrase to serve as an pass-
word-like authentication phrase.
Confirm Authentication Phrase Re-enter the same unique string or phrase to serve
as an password-like authentication phrase.
Privacy Type DES or None. If None, no privacy phrase is required.
Privacy Phrase A unique string or phrase to serve as an pass-
word-like privacy phrase.
To Next Page
Loading...
Need help?
General
