59264-02 A 1-1
1 Introduction
This manual describes the QuickTools™ web applet for SANbox 5800V Series
switches (firmware version 7.4). The QuickTools web applet is the primary focus
of this manual which is organized as follows:
Section 1 describes the intended audience for this manual, related
materials, and technical support.
Section 2 describes how to use QuickTools, its menus, and its displays.
Section 3 describes fabric management tasks.
Section 4 describes switch management tasks.
Section 5 describes port and device management tasks.
A glossary of terms and an index are also provided.
Intended Audience
This manual introduces the switch management products and explains their
installation and use. It is intended for users responsible for installing and using
switch management tools.
Related Materials
Refer to the following manuals for information about switch hardware and
installation.
SANbox 5800V Series Stackable Fibre Channel Switch Installation Guide,
publication number 59265-02.
SANbox 5800V Series Stackable Fibre Channel Switch Command Line
Interface Guide, publication number 59263-02.
SANbox 5800V Series Stackable Fibre Channel Switch Enterprise Fabric
Suite 2007 User Guide, publication number 59266-01.
To Next Page
Loading...
Need help?
General
