Chapter 1: Preface
Safety notices
2 Quantum LTO-9 HH SAS User’s Guide
Appendix B, Tape Alert Flags describes where to find information on
TapeAlert messages that are supported and that may aid during
problem determination.
Safety notices
Observe the safety notices when using this product. These safety notices
contain danger and caution notices. These notices are sometimes
accompanied by symbols that represent the severity of the safety
condition.
The sections that follow define each type of safety notice and give
examples.
Danger notice A danger notice calls attention to a situation that is potentially lethal or
extremely hazardous to people. A lightning bolt symbol always
accompanies a danger notice to represent a dangerous electrical
condition. A sample danger notice follows:
WARNING: An electrical outlet that is not correctly wired could place
hazardous voltage on metal parts of the system or the
devices that attach to the system. It is the responsibility of
the customer to ensure that the outlet is correctly wired
and grounded to prevent an electrical shock.
Caution notice A caution notice calls attention to a situation that is potentially
hazardous to people because of some existing condition, or to a
potentially dangerous situation that might develop because of some
unsafe practice. A caution notice can be accompanied by one of several
symbols:
If the symbol is... It means...
A generally hazardous condition not represented by other safety
symbols.
To Next Page
Loading...
Need help?
General
