Quantum LTO-9 HH SAS User Manual

Chapter 1: Preface
Power Cords
8 Quantum LTO-9 HH SAS User’s Guide
Power Cords
For your safety, Quantum provides a power cord with a grounded
attachment plug to use with this Quantum product. To avoid electrical
shock, always use the power cord and plug with a properly grounded
outlet.
Quantum power cords used in the United States and Canada are listed
by Underwriter’s Laboratories (UL) and certified by the Canadian
Standards Association (CSA).
For units intended to be operated at 115 volts: Use a UL-listed and CSA-
certified cord set consisting of a minimum 18 AWG, Type SVT or SJT,
three-conductor cord, a maximum of 15 feet in length and a parallel
blade, grounding-type attachment plug rated 15 amperes, 125 volts.
For units intended to be operated at 230 volts (U.S. use): Use a UL-listed
and CSA-certified cord set consisting of a minimum 18 AWG, Type SVT
or SJT, three-conductor cord, a maximum of 15 feet in length and a
tandem blade, grounding-type attachment plug rated 15 amperes, 250
volts.
For units intended to be operated at 230 volts (outside the U.S.): Use a
cord set with a grounding-type attachment plug. The cord set should
have the appropriate safety approvals for the country in which the
equipment will be installed.
Quantum power cords for a specific country or region are usually
available only in that country or region.
Product Recycling and Disposal
This unit must be recycled or discarded according to applicable local
and national regulations. Quantum encourages owners of information
technology (IT) equipment to responsibly recycle their equipment when
it is no longer needed.
Notice: This mark applies only to countries within the European Union
(EU) and Norway. Appliances are labeled in accordance with European
Directive 2002/96/EC concerning waste electrical and electronic

Quantum LTO-9 HH SAS Specifications

General

Brand	Quantum
Model	LTO-9 HH SAS
Category	Storage
Language	English