Quantum LTO-9 HH SAS User Manual

Chapter 4: Operations
Unload Button
Quantum LTO-9 HH SAS User’s Guide 39
Unload Button
The Unload button performs the following functions:
Table 4 Functions that the
Unload button performs
Off Flashing
(twice
per
second)
Off Off On There is a drive dump in flash
memory.
1
Power should not be removed from the drive until the microcode update is complete. The drive
indicates that the update is complete by resetting and performing POST.
If green
Ready
Status
Light is
and
amber
Fault
Status
Light is
and
Encryption
Status
Light is and SCD is
and
SCD Dot
is Meaning
Unload button Function How to Initiate the Function
Rewind the tape into the cartridge
and eject the cartridge from the
drive
Press the Unload button once. The Ready light flashes while
the drive is rewinding and unloading.
Note: During a rewind and eject operation, the drive does not
accept host interface commands.

Quantum LTO-9 HH SAS Specifications

General

Brand	Quantum
Model	LTO-9 HH SAS
Category	Storage
Language	English